Channel number(decimal)
Group letter (A,B,C,D)
Group channel(hexadecimal)
Channel frequency
Channel and group setup
- Press SET button (FIG.1 H) once
- Move with UP and DOWN buttons (FIG.1 E & F) until the desired channel
- Press ESC button (FIG.1 G) when finished
When receiver is switched ON, RF indicator (FIG.1 C)should be lit. this means good RF reception
When talking to the microphone, LEDs bar (FIG.1 B)should indicate signal level
- Adjust volume potentiometer (FIG.2 G) until the desired level
ENGLISH
Transmitter
Frequency range
730MHz - 870MHz
Channel numbers
64
Oscillation mode
PLL sinthesized
Frequency stability
± 10 ppm
Modulation
FM
RF output
10mW
AUDIO bandwidth
40Hz - 20KHz
T.H.D. at 1KHz
<0,5%
Power
2 AA 1,5V bateries
Receptor
Frequency range
793,10MHz - 821,60MHz
Frequency numbers
64
Oscillation mode
PLL sinthesized
Frequency stability
± 10 ppm
Receive mode
Superheterodyne
Sensitivity
90 dBm for SINAD tipical 12 dB
AUDIO bandwidth
40Hz - 20KHz
T.H.D. at 1KHz
<0,5%
Signal to noise ratio
³ 100dB
Dynamic range
³ 100dB
Outputs
XLR-3 (balanced, 0dB)
1/4" jack (unbalanced, -20dB)
POWER
12VDC at 200 mA. External power supply