9.3 Inspection intervals – function testing
To ensure trouble-free and safe operation of your TOPITEC
it must be regularly inspected for damage. Also, its switches and buttons must be checked at
regular intervals for proper functioning. With one-shift operation, perform a function test of all
switches and buttons every three months. Make sure that the warning signs on the device
are visible at all times. Before starting the device, check the power cable and the main switch
for proper connection/functioning. This check must be repeated at least once a year. All rotating
and moving device components must be inspected at least once a month. If you encounter any
problems or have any queries, please contact your dealer.
9.4 Warning signs attached to TOPITEC
The following warning signs are attached to the TOPITEC
Check these signs regularly to ensure that they are properly visible.
Warning
Table 3 Warning signs attached to TOPITEC
104
TOPITEC
®
EXPERT User Manual | 11-2018
• Power connection
• Device column
• Safety bracket
• Device column and safety bracket
®
EXPERT
®
EXPERT mixing system,
EXPERT mixing system
®
®
EXPERT when delivered:
Position on device