Safety Instructions - CG Drives & Automation 01-5464-00 Manual Del Usuario

Safety instructions

Read the safety instructions in the instruction manual for the main product.
Installation
Installation, commissioning, dismounting, making measurements, etc. on the
main product may only be carried out by personnel who are technically quali-
fied for the task. Installation must also be carried out in accordance with the
local standards. Ensure that all necessary safety measures are taken.
WARNING!
Take all necessary safety precautions during installation and
commissioning to prevent personal injuries, e.g. by an
uncontrolled load.
Opening the main product
WARNING!
Always switch off the mains supply before opening the main
product.
For AC drives, wait at least 7 minutes to allow the buffer
capacitors to discharge.
Always take adequate precautions before opening the main product, even
though the connections for the control signals and jumpers are isolated from the
mains voltage.
4
CG Drives & Automation 01-5912-11r0