Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION INSTRUCTIONS
1. Carefully remove the heater from
the OFF position before plugging the heater into the power outlet.
2. Before using the heater, make sure that it is on a flat and stable surface.
Damage may occur if it is placed in an incline or decline.
3.
Turn the power control to the off position
directly into a standard AC outlet.
plugs fits loosely when inserted into the outlet.
4.
When the heater is not in
from the socket-outlet.
NOTE: When the heater is turned on you may notice vibration/noise coming from
the grill and the interior quartz tubes. PLEASE NOTE THAT THIS IS NORMAL
AND SAFE OPERATION. Once the quartz heating element has warmed up, the
vibration/noise will go away.
NOTE: THIS UNIT IS FOR FLOOR USE ONLY.
Power Control
Turn the
Power
Control to the desired setting:
I/O - off Mode
If you want to shut off the heater at any time of operation, turn the
Off (I/O) position. Power Light may remain lit until the heater is unplugged.
"1" – Low Heat Setting (750 Watts)
"2" – High Heat Setting (1500 Watts)
Thermostat Control
1. Before setting the thermostat, allow heater to operate and
noted above, turn the Thermostat Control clockwise to highest
start the heater.
2. When the desired temperature is reached,
counter clockwise until the heater turns off.
3. The control will now automatically maintain the pre-set temperature level by
turning the heater ON and OFF.
NOTE: It is normal for the heater to cycle ON and OFF as it maintains the preset
temperature. To prevent the unit from cycling,
CAUTION: FRONT GRILL IS HOT WHEN UNIT IS IN OPERATION.
the
carton and bag. Make certain the unit is in
and then plug the heater power cord
The outlet may need to be replaced if the
use, turn all the controls to
increase
OFF （O） ,
and remove plug
Power
heat
the room. As
turn the thermostat control
the thermostat setting.
Control to
setting
to
Publicidad
Tabla de contenido
