Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION PROCEDURE / STEP 2
2
1. Put & level wall channel (2) at the installation position, then mark the drilling hole.
2. Drill hole with 1/4" (6mm) drill bit.
3. Glue a little silicone into the hole, then insert wall anchor (8).
4. Glue a little silicone on the back of wall track (2).
5. Fix wall channel (2) with screw 1/8" x 1 5/8" (9) against the wall.
RIGHT HAND ASSEMBLY
LEFT HAND ASSEMBLY
- 4 -
Publicidad
Tabla de contenido
