Electro Depot VALBERG 14S42 C XAD929C Instrucciones De Uso página 21

B
Under an existing worktop (in case of installation under a worktop)
• In most modern fitted kitchens, there is a single worktop under which the cabinets
and appliances are installed. In this case, remove the worktop from the dishwasher by
removing the screws under the rear edge of the top section).
CAUTION
After removing the worktop, the screws must be
reinstalled under the rear edge of the upper section).
The height of the appliance will then be reduced to 815
mm, in accordance with international (ISO) regulations,
and the dishwasher will fit perfectly under the kitchen
worktop.
Using the appliance
14 EN