Proline PL1800 Manual Del Usuario página 27

3. Set the thermostat of the plug-in connector to the "MIN" position
4. Connect the plug-in connector to the pins of the appliance and then connect
the cord to the mains socket.
• When using the appliance for the first time, there maybe a slight odour
and a little smoke during the first few minutes.
5. Preheat the appliance for about 5 minutes on the maximum setting.
• The indicator light will illuminate.
COOKING
After preheating, the appliance is ready for cooking.
• Set the thermostat to the desired position.
• Leave to cook depending on your taste.
• When you finish cooking, set the thermosat to the "MIN" position.
NOTE :
• Never cut directly on the appliance.
• Always use a wooden spatula to avoid damging the cooking surface.
• Do not touch the metal parts of the appliance when it is operating, as they
are very hot.
.
25