Important Safeguards; Using The Scale; Switching Off - Russell Hobbs 13559-56 Instrucciones

Read the instructions and keep them safe. If you pass the appliance on, pass on the instructions
too. Remove all packaging, but keep it till you know the appliance works.

important safeguards

Follow basic safety precautions, including:
1 This appliance must only be used by or under the supervision of a responsible adult.
2 Don't put the appliance in liquid, don't use it in a bathroom, near water, or outdoors.
3 Store the appliance away from direct sunlight, and, if possible, from fluorescent light.
4 Keep the appliance at least one metre away from electronic equipment (computer, TV, radio,
telephone, etc.), to avoid interference.
5 Don't use the appliance for any purpose other than those described in these instructions.
6 Don't use the appliance if it's damaged or malfunctions.

using the scale

1 Sit the scale on a stable level surface, and unfold the display.
2 Vibration and air movement will affect its accuracy.
3 Remove the cover from the scale.
4 Turn the cover upside down, and use it as a bowl.
5 Put the item to be weighes in the centre of the scale.
6 Press the T button to switch the display on.
7 The display will light up, then settle at 0g.
8 You may toggle the display between g (grams) and oz (ounces) by pressing the "g/oz" button.
"g" or "oz" will show on the right of the display.
tare
9 Press T to return the display to zero.
10 Use this function to deduct the weight of the container, or the weight of existing ingredients:
a) Put the bowl on the scale.
b) When "HOLD" appears on the bottom right of the display, the reading is correct.
c) Press T to return the display to zero.
d) Add the first ingredient, and wait till "HOLD" appears.
e) Press T to return the display to zero.
f) Add the next ingredient, and wait till "HOLD" appears.
g) Press T to return the display to zero.
h) Repeat till you've weighed all the ingredients.
11 The scale is limited to 7.5kg. If you exceed this weight, the display will show "O-Ld".
12 When you remove the bowl from the scale, a "–" sign appears above "HOLD".
13 Press T to return the display to zero, then carry on.
switching off
14 The light behind the display will go off after about 10 seconds of non-activity.
15 It will come on again if you add something else to the scale.
household use only
14