Installation; Connecting The Microscope To The Mains Power Supply; Índice - Zeiss Primostar 1 Manual De Instrucciones

ZEISS

4 Installation

Perform only the installation work described in this document. All other installation work not de-
scribed below may only be carried out by an authorized ZEISS service representative.

4.1 Connecting the Microscope to the Mains Power Supply

Procedure 1. Remove the plug-in power unit from its storage fixture.
2. Connect the plug-in power unit to the mains
3. If necessary, replace the installed power outlet adapter with one of the supplied country-
4. Connect the plug-in power unit to the mains power supply.
Instruction Manual ZEISS Primostar 1 | en-US | Rev. 2 | 415501-7021-111
socket of the microscope.
specific adapters.
4 Installation | 4.1 Connecting the Microscope to the Mains Power Supply
17