Troubleshooting; Care And Maintenance; Technical Data - ANSMANN COMFORT MINI Manual De Operación

(*1) If the connected USB device does not supply enough current (recommended
min. 1A), the device will pause a charging slot. You can still charge your batteries
without any problems, but the charging process takes longer due to this pause.

TROUBLESHOOTING

Problem
No LED indication
Battery is not recog-
nized
LED is flashing orange

CARE AND MAINTENANCE

Cleaning
Disconnect the power supply to the product and remove all batteries
before cleaning.
Only use a soft, dry or slightly damp cloth for cleaning (if necessary,
add a little mild washing-up liquid). Never use abrasives or solvents for
cleaning.

TECHNICAL DATA

Power source
Charging slots
Charge current
Trickle charge current
Deutsch |
14
Italiano | Nederlands | Dansk | Suomi | Norsk
Possible cause
- No connection to
USB power source
- USB power supply
defective
- Battery inserted
with reverse
polarity
- Battery slot pau-
ses, as the current
of the USB power
source is too low to
charge all batteries
at the same time
USB 5V, min. 1A for fastest charging, max. 2.4A
2
AA: 800mA / AAA: 400mA
AA: 13mA / AAA: 6.5mA
English | Français | Español | Português | Svenska
Resolution
- Check the con-
nection
- Use a different
USB power supply
- Insert the battery
with the correct
polarity
- Use USB power
source with a mini-
mum of 1A output
current
- Or accept the lon-
ger charging time