1. SHORT FURNITURE DOLLY
Place cart on all four
wheels with sides folded
down as shown.
FOLD SIDES IN THIS ORDER:
Push down release cable
over large wheels with one hand
and fold down side with the other hand.
Fold side over front swivel casters in the same manner.
Cart will not fold down correctly unless done in this order.
2. SHORT PLATFORM CART
From short furniture dolly:
Firmly push down on release cable located
over swivel casters with one hand while raising
the foldable side with the other hand
until side locks into place in
upright position.
3. SHORT HI-STACKER
From short platform cart:
Raise both sides as previously
described in configuration 2.
4. LONG HI-STACKER
From short hi-stacker:
Loosen two wing bolts under
frame 1/4 turn and push in
the extension stop button.
Extend frame until stop
button engages.
Tighten wing bolts.
PAGE 2 OF 6
CONFIGURATIONS
5. LONG NOSE LUGGAGE CART
From long hi-stacker:
Set on end with large wheels down as
shown. Pull top release cable and lower
top foldable side.
6. LONG PLATFORM CART WITH SIDE
From long nose luggage cart:
Set cart back on all four wheels.
Firmly push down on release
cable located over
swivel casters with one
hand while raising the
foldable side with the
other hand until side
locks into place in
upright position.
Pull release cable located over large wheels and lower
foldable side.
7. LONG PLATFORM CART
From long platform cart
with side:
Pull release cable
located over swivel
casters and lower
foldable side.
8. STORAGE-TRANSPORT
From long platform cart:
Unfold both sides so they are upright.
Set on end with large wheels down.
Loosen two wing bolts under frame 1/4
turn, push in the extension stop button,
and collapse frame. Tighten wing bolts.
Place cart on all four wheels.
Fold down sides following the order in configuration 1.
Stand cart on end for storage.
1-800-295-5510
uline.com
0521 IH-3382