Rapid Installation - Beninca DIVA.3 Manual Del Usuario

RAPID INSTALLATION

1. Press the <PG> button, the display will go to the first "INST" Installation
menu.
2. Enter the INST menu.
3. Check the BOOM parameter is correct: 3-5 for DIVA.3.
4. Set the position of the barrier in the POS menu, by default it is set as the
RIGHT barrier.
If you want to invert the barriers, consult the "RIGHT/LEFT BARRIER AR-
RANGEMENT paragraph
Once the position is configured of the barrier on the POS menu, the control
unit automatically enters the AUTOSET menu [6].
5. Enter the AUTO menu, confirm with PG.
6. The message UNLK is displayed, release the barrier and manually move
the shaft to bring it to the opening position, the display shows WAIT.
7. After a few seconds, the LOCK message is displayed to relock the barrier.
8. The control unit slowly brings the shaft to the closure position.
9. Two complete manoeuvres are automatically carried out of opening and
closure, at reduced and normal speed, at the end of which the autoset pro-
cedure has terminated.
10. In the PAR and LOG menus, select the operating parameters and logic
required based on the type of installation.
IMPORTANT: After each variation in the FSTS, FSTC, SLDO, SLDC, TSMO,
TSMC parameters, the barrier executes a complete opening and closure
manoeuvre to acquire the new current and torque values, the display will
show the "PRG" message.
Repeat the autoset procedure after each maintenance intervention.
8888
8888
inst
inst
8888
8888 inst 8888 INST
INST
8888 INST
8888
8888
inst
boom
inst
boom
inst boom
RIGHT
0---
8888
1
1
8888 INST
8888
INST
8888 INST
1
CLACK!
CLACK!
1
1
CLACK!
1
CLACK!
CLACK!
CLACK!
ait lock
ait lock
ait lock
ait lock
ait lock
CLACK!
CLACK!
ait lock
CLACK!
CLACK!
CLACK!
CLACK!
clos
clos
clos clos open open
SLOW
SLOW
clos open
SLOW
SLOW
SLOW
clos open clos
SLOW
INST
INST
boom 3-5
boom 3-5
INST
8888 INST
boom 3-5
inst
boom
INST AUTO
INST AUTO
3-5
3-5
3-5
LEFT
---0 ---0
0---
INST AUTO
8888 2
INST
2
AUTO AUTO
AUTO
AUTO AUTO
2
1
2
2
2
CLACK!
ait lock
CLACK!
open clos open
open clos
open
clos clos open open
clos open
STANDARD
STANDARD
clos open
STANDARD
STANDARD
SLOW
STANDARD
open ok
STANDARD
EN
3-5
AUTO un
AUTO un
AUTO unlk
AUTO
unlk
AUTO unlk
unlk
2
ok
ok
ok ok
clos open
ok
STANDARD
23