General Recommendations; Cleaning The Appliance; Error Codes - ROBLIN MAESTRO Manual De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 81

General recommendations

Never use scouring pads, steel wool,
Z
X
muriatic acid or other products which
could scratch or mark the surface.
Foods that accidentally fall or settle
Z
X
on the surface, on the functional or
aesthetic elements of the hob must
not be eaten.

Cleaning the appliance

Clean the appliance after every use
Z
X
in order to prevent food residues
from burning on.
To clean everyday dirt, use a soft
Z
X
cloth or sponge with water and a
suitable cleaning agent. Follow the
manufacturer's advice with regard
TROUBLESHOOTING

Error codes

Error code
Description
ER 03 and
Continuous sensor
continuous
activation; TC turn
tone
off after 10 sec
ER 20
Flash memory – TC
error
ER 22
Button evaluation
defective,
UI shuts off after
3.5-7.5 sec
to cleaning agents. We recommend
using protective cleaning agents.
Remove encrusted dirt, e.g. from
Z
X
milk that has boiled over, with a
glass ceramic hob scraper while the
hob is still warm. Please follow the
manufacturer's advice with regard to
the scraper.
Remove sugary foods, such as mar-
Z
X
malade, that have boiled over with a
glass ceramic hob scraper while the
hob is still warm. Otherwise, this could
damage the glass ceramic surface.
Remove melted plastic with a glass
Z
X
ceramic hob scraper while the hob
is still warm. Otherwise, this could
damage the glass ceramic surface.
Remove limescale stains using a
Z
X
small amount of lime-dissolving
solution, e.g. vinegar or lemon juice,
when the hob has cooled down. Then
clean again with a damp cloth.
Possible cause of error
Water or cookware on
the glass over the touch
control sensors
µC-defective
Short or open circuit in
the area of the button
sensoric
Remedy
Clean the control
surface, remove
objects on the sensors.
Replace TC
Replace TC
EN
37

Publicidad

Tabla de contenido
loading

Tabla de contenido