Before You Begin; Tools Needed - Barrette BOM-34107025 Instrucciones De Instalación

WARNING:
• Improper installation of this product can result in personal injury. Always wear safety goggles when
cutting, drilling and assembling the product.
• Incorrect installation may cause harm to the gate or individual.
• Not pool code approved.
• Do not allow children to play with the gate.
NOTICE:
• DO NOT attempt to assemble the kit if parts are missing or damaged.
• DO NOT return the product to the store, for assistance or replacement parts call: 1-800-336-2383.
CHECK YOUR LOCAL ZONING LAWS
• Local zoning laws and Home Owners Associations may regulate the location, style and
height of your fence or even require a permit signoff beforehand.
• Check local codes for frost line depth and regulations. Contact your local utilities companies.
• You must have the utility companies clearly mark your property for electrical, gas or water
lines to avoid puncturing any unseen underground utilities.

BEFORE YOU BEGIN:

Vinyl gate posts require an internal support
system for weight-bearing purposes
therefore a post stiffener is required. Post
stiffener needs to be purchased separately.
Fence
Top View of Routed Post Top View of Routed Post
NOTE: Components shown are for visual reference only and may not depict the exact style of
your product. Please see product label for correct number of pieces.
Lattice Top Gate
Component list:
Description
Lattice
Boards
Top Rail
Middle Rail
Bottom Rail
Gate Uprights
P-Channel Inserts
U-Channels
Upright Caps
Screws
Vinyl Cement
Boerboel Hinges
®
2
Purchased
Stiffener
Gate Pockets
U-Channels

TOOLS NEEDED:

Pencil
Phillips Screwdriver
Safety Glasses
Line Level
Tape Measure
Drill
#2 Square Drive Bit
Boerboel Gate Hardware
®
(Latch)
Lattice Top
Internal Post Top
Top Rail
Middle Rail
Bottom Rail
Gate Upright