Technical Data; Safety Instructions; Storage, Cleaning - Livarno Living LS-4912 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14
Congratulations!
With your purchase you have decided on a high-
quality product. Get to know the product before
you start to use it.
Carefully read the following instructions
for use.
Use the product only as described and only for the
given areas of application. Keep these instructions
safe. When passing the product on to a third party,
always make sure that the documentation is included.
Package contents (fig. A)
1 x seat (1)
4 x chair legs (2)
1 x spanner (3)
1 x instructions for use

Technical data

Maximum load: 110kg
110
Date of manufacture (month/year):
02/2018
Dimensions: approx. 72 x 87 x 76cm (W x H x D)
Correct use
The item is not intended for commercial use. The
item is intended for indoor and outdoor use.

Safety instructions

Life-threatening hazard!
• Never leave children unattended with the pa-
ckaging materials. There is a risk of suffocation.
Risk of injury!
• Make sure the product is stable before use.
• Place the item on a level surface.
• The item must only be used under adult supervi-
sion and must not be used as a toy.
• The item must only be used by one person at a
time.
• The item is not a toy or a climbing apparatus!
Ensure that persons, especially children, do not
pull themselves up on the item or lean against
it. The item can tip over.
• Check the item for damage and wear before
each use. Check regularly to make sure all
screws are tight!
All manuals and user guides at all-guides.com
• Do not use the item near an open fire.
• The backrest must not be used for sitting on.
• Never stand on the item.
Avoiding damage
• Protect the item during extreme weather condi-
tions such as strong wind. Store the item in a
sheltered area.
• The manufacturer/seller accepts no liability for
accidents which occur as a result of ignoring
the safety information below, or as a result of
inappropriate use.
Assembly (Fig. B)
1. Place the seat (1) with the underside facing
upwards, on a flat, soft surface.
2. Screw the threaded ends of the four chair legs
(2) fully into the threaded holes in the seat
frame. Slot the supplied spanner (3) onto the
notches on the chair legs and tighten firmly.
Caution! The threads are greased. Take care
not to allow the grease to come into contact with
clothing, carpets etc.
3. Turn the item over and place it on level ground.
To ensure that the chair is stable on uneven
ground, the length of the legs can be adjusted
as required using the adjusting screws.

Storage, cleaning

Always store the product in clean and dry condi-
tion at room temperature. Only use water to clean
and wipe it dry with cleaning cloth. IMPORTANT!
Never clean the product with aggressive cleaning
agents.
Disposal
Dispose of the article and the packaging materi-
als in accordance with current local regulations.
Packaging materials such as foil bags are not sui-
table to be given to children. Keep the packaging
materials out of the reach of children.
Notes on the guarantee and
service handling
The product was produced with great care and
under constant supervision. You receive a three-
year warranty for this product from the date of
purchase. Please retain your receipt.
GB/IE
7

Publicidad

Tabla de contenido
loading

Tabla de contenido