ABC Design Condor 4S Instrucciones De Uso página 10

8. Fitting and changing the Tec Comfort Set
Seat liner:
Undo the strap. For more information, follow the instructions in
section 9.
a.
Then pull the crotch belt through the opening in the seat liner.
b.
Fix the tab on the head end of the seat liner with the Velcro fastening on the backrest.
Guard rail cover:
c.
Fit the cover around the guard rail and secure it in place with the Velcro fastening.
Let go of the buttons again so that the leg rest clicks into place.
10. Fastening the harness
a.
To fasten the harness, bring the top two plastic catches together and interlock them.
b.
Then insert the interlocked catches into the bottom part of the fastening.
11. Unfastening the harness
To open the harness, press the button on the side.
remain in that position.
Lift the side panels of the carrier.
14. Attaching the cot bumper
Fasten the four press studs on the rear.
15. Attaching the hood to the cot bumper
Fasten the four press studs on the bottom of the hood onto the bumper.
EN