auna Sound Maitre DAB Instrucciones De Uso página 17

AUX-IN mode
1. Make sure that the device is in AUX-IN mode. If the unit is not already
in AUX-IN mode, briefly press the Mode button on the front of the unit
until 'AUX-IN' is displayed on the unit's screen.
2. Use a 3.5 mm audio input cable (not included) to make the connection.
The AUX-IN connector allows you to quickly and easily connect to
external audio sources.
3. Connect one end of the 3.5 mm audio cable to the headphone jack (or
AUX-OUT jack) of your external device and connect the other end to the
LINE-IN jack on the back of your device.
4. Press the play button on your external device to start playback on the
radio.
5. To get the optimum volume, adjust the volume on both the external
device and the radio.
NOTE: It is recommended that once you have finished playing through the
external device, you remove the audio cable from the LINE-IN connector.
EN
17