Chapter 1. Description; Preface; Machine Features; Machine Technical Data - Minipack-Torre RP40 Instrucciones Para La Instalación, Uso Y Mantenimento

Chapter 1. Description

1.1. Preface

This manual has been drawn up in compliance with the UNI10893 standard dated July 2000. It is meant for all users in order to enable
them to use the machine correctly. Keep it in a place which can be easily accessed in the proximity of the machine and which is known
to all users. This manual is an integral part of the machine for safety reasons. We wish to specify the symbols in use here below in order
to improve understanding of them.
ATTENTION:
Accident prevention rules for the operator. This warning indicates the presence of dangers which can injure the
person operating on the machine.
ATTENTION:
Hot parts. Shows the danger of burning, thus involving the risk of a serious accident for the exposed person.
ATTENTION:
Don't touch!
WARNING:
It indicates the possibility of damaging the machine and/or its components.
All reproduction rights of this manual are reserved to the manufacturer. Partial or complete reproduction is forbidden as provided by the
law. Descriptions and pictures provided in this manual are not binding. Therefore the manufacturer, reserves the right to make any
change considered necessary. This manual cannot be transferred for viewing to third parties without authorisation in writing from the
manufacturing company.

1.2. Machine features

You have bought a machine with outstanding features and performance and we thank you very much for choosing it. The system is
unique and has achieved worldwide success with more than 200000 units operating in the packaging and wrapping sector.
The technological concept of its design, as well as the components and materials used in the manufacturing and testing process are the
best assurance of proper operation and lasting reliability.
Thanks to its particular operating circuit, it can be used both as a sealing and shrinking machine or as a sealing machine only. In the
latter case it is possible to pack the object in a soft bag without shrink-wrapping.

1.3. Machine technical data

Chapter 2. Film features

2.1. Films to be used

The machine can work with all heat-shrink and non-heat-shrink films, from 15 to 50 microns
in thickness, of a technical and food type. To guarantee the best results, use the films
marketed by us.
The special features of our films, with regard both to compliance with laws in force and to
excellent machine performance.
RP40 A = 500mm MAX
RP55 A = 600mm MAX
RP85 A = 800mm MAX
Consult the data and safety sheets of the films in use and observe the
corresponding instructions!
All manuals and user guides at all-guides.com
Width "a"
Length "b"
Height "c"
Weight
Width "a"
Length "b"
Height "c" (hood closed)
Height "c" (hood open)
Weight
Maximum production
D = 250mm MAX
D = 250mm MAX
D = 300mm MAX
15
RP40 RP55
1330mm 1330mm
1080mm 1080mm
880mm 880mm
114Kg 123Kg
RP40 RP55
1160mm 1260mm
700mm 810mm
1120mm 1165mm
1220mm 1310mm
90Kg 99Kg
300 300
packs/hour
d = 77mm
d = 77mm
d = 77mm
EN
RP85
2180mm
1040mm
1430mm
264Kg
RP85
1950mm
1000mm
1180mm
1480mm
212Kg
300
packs/hour packs/hour
EN