Congratulations!
You have just acquired a quality product with the highest tecnology
developed by TRAPP.
This product was designed to work quickly and efficiently, providing total safety,
at low cost.
Safety measures should be followed to operate this equipment.
The safety measures stated in this operating instructions do not cover all possible
situations which may occur during usage. The operator must be aware that good sense,
attention, and precautions cannot be incorporated into the product, therefore caution
should be taken when operating and servicing TRAPP shredders.
Attention!
Read all the instructions in this
manual before operating the
equipment. Always observe and
follow the safety indications to
prevent accidents and/or injuries.
Read and keep these instructions:
1 - Working area.
✔
Do neither use the equipment near
explosive environments nor near
flammable liquids, gases and/or dust
under suspension. The equipment
electrical installation produces sparks that
may ignite flammable liquids, gases or
dust under suspension.
Keep children and away. People,
✔
especially children, must remain at a safe
distance from the working area when the
equipment is being used. The operator/
user is responsible for accidents that may
occur.
Important Recommendations
37
2 - Electrical safety.
✔
Do not expose the equipment to either rain
or humidity. Install the equipment in a dry
place, protected from weather conditions.
Water inside the equipment can damage the
electric circuit of the motor, besides
increasing the risk of an electric shock.
For your safety, ground the equipment.
✔
Failure to do so may result in an accident,
electrical shock or personal injury.
If you need maintenance and spare parts, get
in touch with you local distributor or an
authorized technical assistant:
In case of further difficulties, get in touch
with:
METALÚRGICA TRAPP LTDA.
Rua Pref. Waldemar Grubba, 4545
89256-502 - Jaraguá do Sul - SC - Brasil
Tel.: +55 47 3371-0088 / +55 47 2107-8800
Fax: +55 47 3371-1997
e-mail: trapp@trapp.com.br
ENGLISH