NSK Ti-Max Z-SG45L Manual De Operación página 14

Chuck cleaning
Bur Insertion Hole
Clean the Push Button chuck once a week.
1) Mount the arrow-head spray nozzle tip into the spray can port.
2) Lubricate the chuck directly through the bur insertion hole (Fig. 9).
3) Lubricate handpiece by using NSK PANA SPRAY Plus (Fig. 8).
Arrow-head Spray Nozzle
Fig. 9
CAUTION
• If the chuck is not regularly cleaned the chuck grip may be weakened and the bur may be accidentally released while in operation.
13