NSK Ti-Max X Serie Manual Del Usuario página 4

1. Mounting/Removing the Handpiece and Motor
1-1 Mounting
Align the handpiece to the Motor and push together. For X10L,X12L,X15L,X25L,X85L,X95L, Locate the handpiece and alignment pin straight into
positioning of the motor.
1-2 Removing
Hold the motor and the handpiece, and pull off carefully, in a straight line.
2. Connecting/ Disconnecting the Bur
2- 1 Connecting
a ) X10L/X10,X12L/X12,X15L/X15,X25L/X25 ( Contra Angled Bur )
1 ) Insert the bur into the head and turn it slightly. ( If bur and head in right position, bur is all the way
seated in the head )
2 ) Insert the bur into the head until it click. ( Fig.1 )
D-shape
X15L
Fig. 1
3