Bosch GSH 3 E PROFESSIONAL Instrucciones De Servicio página 8

1 619 929 E39.book Seite 1 Freitag, 10. Februar 2006 7:57 07
Tool Specifications
Demolition
Hammer
Article number
Rated power input [W]
Impact rate [bpm] 0 – 3 500
Impact energy per
stroke [J]
Chisel positions
Chiselling capacity in
concrete of medium
hardness [kg/h] 31
Tool holder
Spindle collar
diameter [mm] Ø 56
Lubrication
Weight according to
EPTA-Procedure
01/2003 [kg]
Protection class
Please observe the article number on the type plate of your
machine. The trade names of the individual machines may
vary.
The values given are valid for nominal voltages [U] of 230/
240 V. For lower voltages and models for specific coun-
tries, these values can vary.
Intended Use
The machine is intended for chisel work in con-
crete, brick and masonry as well as for the re-
moval of tiles, plaster, adhesive remainders and
stucco when using the respective accessories.
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
1 Dust protection cap
2 Locking sleeve
3 Chisel adjusting ring (Vario-lock)
4 Lock-on button for On/Off switch
5 On/Off switch
6 Auxiliary handle
Not all of the accessories illustrated or described are
included as standard delivery.
8 • 1 619 929 E39 • TMS • 06.02.06
All manuals and user guides at all-guides.com
Noise/Vibration Information
Measured values determined according to
GSH 3 E
EN 60 745.
PROFESSIONAL
0 611 320 7.. Typically the A-weighted noise levels of the ma-
chine are: sound pressure level 90 dB (A); sound
650
power
uncertainty K = 3 dB.
Wear hearing protection!
4.3
Overall vibrational value (vector sum of three di-
12
rections) determined according to EN 60 745:
Chiselling: Vibrational emission value a
uncertainty K=2 m/s
SDS-plus
has been measured in accordance with a stand-
ardised test given in EN 60 745 and may be used
Oil lubrication
to compare one tool with another.
The vibration emission level will vary because of
the ways in which a power tool can be used and
3.5
may increase above the level given in this infor-
/ II
mation sheet. This could lead to a significant un-
derestimate of exposure when the tool is used
regularly in such a way.
NOTE: To be accurate, an estimation of the level
of exposure to vibration experienced during a
given period of work should also take into ac-
count the times when the tool is switched off and
when it is running but not actually doing the job.
This may significantly reduce the exposure level
over the total working period.
Additionally, the general safety instructions either
in the enclosed booklet or those added in the
centre of these operating instructions must be ob-
served.
SAVE THESE INSTRUCTIONS.
English - 1
level 101 dB (A).
2
.
The vibration emission level
WARNING
given in this information sheet
For Your Safety
Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may result
in electric shock, fire and/or serious
injury.
When working with the machine, always
hold it firmly with both hands and provide
for a secure stance. The power tool is guided
more secure with both hands.
Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held more
securely than by hand.
Do not work materials containing asbes-
tos. Asbestos is considered carcinogenic.
Measurement
2
=16 m/s ,
h