Speedaire 440G03A Manual De Instrucciones página 9

MAINTENANCE AND INSPECTION INSTRUCTION
Ratchet / Spring Inspection
When the cable is pulled out, the "clicking" sound should be heard.
After the "clicking" noise is heard, the rotating drum will be locked in place by the ratchet device
and the cable will be held in place.
If the clicking sound is not heard, the cable should rewind automatically
The inspection should proceed as above periodically.
● When the ratchet device does not work, it should be replaced.
● When the cable is not rewound automatically, the unit should be replaced.
Any repairs or replacements must be done by a
qualified person or authorized service center only.
The inspection should be performed periodically.
Also the maintenace record should be logged.
7