X10 LK15 Manual De Usuario página 3

All manuals and user guides at all-guides.com
LK15 Home Control Kit
OWNERS' MANUAL
The 3 piece Wireless Control Kit includes:
• Key Chain Radio Remote KR22 (4 ch + dim)
• Radio Transceiver TM13 (1.000W on/off)
• Bayonet or Screw-In Lamp Socket LM15
(100W on/off)
1. Installation and set up of the LM15 Lamp Socket
A. Turn the power off.
B. Remove the light bulb from its socket and insert
the Lamp Socket LM15 into the lamp socket.
C. Insert a light bulb (100W max. open shade,
60W max. closed shade) into the Lamp Socket.
D. Turn the power back on again.
2. Take the Radio Transceiver TM13 out of the
packaging (white plug-in module with antenna) and
plug it into a wall outlet at a central place in your
home. Put the antenna in the upright position. Plug
an appliance or a table lamp into the socket of the
Radio Transceiver.
3. With the supplied Key Chain Radio Remote KR22, you
now can switch on the Radio Transceiver TM13 by
pushing the On button left of the number 1 on the
remote. You can switch it off again by pushing the
Off button right of the number 1. You can switch the
lamp in the Lamp Socket LM15 on and off with the
buttons left and right of the number 2 on the
remote.
How does X-10 work?
Quite simple! The commands you're transmitting from your
Key Chain Radio Remote are picked up by the Radio
Transceiver (also through walls and ceilings). This unit then
3