EAS ELECTRIC EHC2200 Manual De Instrucciones página 15

Display
"-" key
Timing key
Sway key
Key
Function Description
On/off
On the idle mode, press on-off key to enter the power-on
mode, the warmer starts working and the whole machine
runs
temperature. On the power-on mode, press on-off key to
enter the idle mode, the warmer stops working. (Note: On
the heating mode, draught fan will operate for 15 seconds
at low wind speed after power off.).
Heating
After power-on, the warmer is in the intelligent mode by
level
default. Repeatedly press the "Mode" key, the warmer
shifts in circular order among Intelligent mode > low
warm wind > high warm wind > strong warm wind >
breeze > gentle breeze.
+ and -
under the
On the working state, press "+" or "-" keys to set the
working temperature. The temperature setting range is
5ºC - 35°C and every temperature value is of 1°C difference.
The machine confirms and displays the set temperature
value if without operation within 3 seconds after the
setting. After
temperature, display screen blinks for 10 seconds and
heating unit stops working; when temperature is below
the set temperature, machine restarts to heat. In low
warm wind, high warm wind, and strong warm wind
modes, it can be set to without temperature control,
whose display icon is "--".
"+" key
ON/OFF key
Mode key
previous remembered
room temperature
5
Display screen
mode and
reaches the set
V.1