Uline Rubbermaid Microburst 3000 Manual Del Usuario página 4

MOUNTING
1. Use the alcohol swab to clean the area of the wall
where dispenser will be placed.
2. Remove the liner off the back of the adhesive
and stick dispenser to the wall 7' from the floor.
(See Figure 11)
Figure 11
3. Open the front cover and drill screws into place.
(See Figure 12)
Figure 12
PAGE 4 OF 12
SETUP CONTINUED
7'
1-800-295-5510
4. Press on/off button to turn dispenser off.
5. Insert refill can with spray nozzle facing out of the
dispenser and away from wall. (See Figure 13)
6. Press on/off button to turn dispenser back on.
7. Close dispenser cover.
uline.com
Figure 13
1
*
2
0321 IH-7682