Before The First Use - Eden ED-7005 Manual De Usuario

4. Pan
5. Handle
6. Air outlet openings

BEFORE THE FIRST USE

• Remove all packaging material.
• Remove any stickers or labels from the appliance.
• Thoroughly clean the parts with hot water, some washing-up
liquid and a non-abrasive sponge.
• Wipe the inside and outside of the appliance with a moist cloth.
• Place the appliance on a stable, horizontal and level surface, do
not place the appliance on non-heat-resistant surfaces.
• When the device is turned on for the first time, a slight odour will
occur. This is normal, ensure adequate ventilation. This fragrance
is only temporary and will disappear soon.
• Place the removable grid in the pan properly. NOTE: do not use
the appliance without this grid.
• This is an air fryer that works on hot air. Do not fill the pan
with oil or frying fat.
• In order to prevent disruptions of the airflow do not put
anything on top of the appliance and make sure there is
always 10 centimeter of free space around the appliance.
ICON FUNCTIONS AND USE
POWER ON/ START/STOP
OFF
•
•
•
Using the Aero fryer
•
•
•
•
•
•
MODE TIMER
Press the ON/OFF icon to turn the appliance on or off or to
cancel a setting.
Press the START/STOP icon to start or pause a program. To
stop, press the it again. The appliance will shut off after 20
seconds.
Press the MODE icon to select between programmed mode.
There are 8 frying programs modes included: [PEREHEAT]
[FRIES] [MEAT] [CHICKEN DRUM STICKS] [SHELLFISH],
[ROASTBEEF] [FISH] and [BAKE]. Press the MODE icon
followed by the desired frying program then press START.
Put the mains plug in an earthed wall socket.
Carefully pull the pan out of the Aero fryer.
Put the ingredients in the pan, make sure the removable grid is
placed in the pan before you put in the ingredients.
Slide the pan back into the Aero fryer.
Do not touch the pan during and sometime after use, as it gets
very hot. Only hold the pan by the handle.
Press the POWER button to turn on the appliance then choose
between using manual input or a programmed setting.
Instruction manual
EN
5