Charging
Press the release button on the battery (6)
and pull it out of the pruning shears.
Insert the charging connector from the
charger (7) into the socket on the battery and
plug the charger into a mains socket.
The red indicator light will come on while the
battery is charging. Charging takes approx.
3-5 hours.
Once the red indicator light on the charger
goes out and the green indicator light comes
on, the battery is fully charged.
Unplug the charger from the socket. Remove
the charging connector from the battery.
Insert the battery into the pruning shears.
Check that it engages properly.
Use
Grasp the handle with one hand.
Place the open blade around the branch to
be cut.
Push the safety button (4) forward while
pressing the on/off button (3).
The movable blade (1) closes towards the
counter-blade (2) to make a cut.
Release the on/off button to open the blade
again.
Place the protective cap (5) on the blade
once you have fi nished using it.
GB
33