Stabilizing Bar For The Back; Siderest With Locking Mechanism, Height Adjustable, Flip-Back - Küschall COMPACTattract Manual Del Usuario

Ocultar thumbs Ver también para COMPACTattract:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

3.5 Stabilizing bar for the back

An optional stabilizing bar is available to increase the rigidity of
the backrest on wheelchairs with large back heights or widths.
IMPORTANT!
– Do not use the stabilizing bar to lift or push the
wheelchair. It could break.
– Release the stabilizing bar before folding the
wheelchair.
Releasing the stabilizing bar
1.
Push the spring pin A on the fastening on the left-hand side
and swivel the stabilizing bar downwards.
The stabilizing bar can also be completely removed, by pushing
the spring pins on both sides. The stabilizing bar can then be
taken off.
1589081-A
All manuals and user guides at all-guides.com
3.6 Siderest with locking mechanism, height
adjustable, flip-back
Folding
1.
Removing
1.
Fitting
1.
2. Fold it downwards.
Adjusting the height
1.
2. Move the armrest upwards or downwards until you reach
Push the grey grip A and fold the siderest back.
Fold the siderest back and pull it up out of the holder on
the back.
Insert the siderest from above into the holder on the back.
Release the bolt in the middle of the seat back using a
spanner.
the desired height.
Components and their functions
13

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido