Raikko USB ACCUPACK 7000 Instrucciones De Manejo página 9

English
GeneRAL InFORMAtIOn
1 CHARGInG tHe ACCUPACK
Please fully charge the Accupack before using it for the first time.
Charge the Accupack either using the USB port of a PC or laptop,
or a USB power adapter. To do so, remove the charging cable
from the packaging and plug in the Micro-USB adapter. Connect
the Micro-USB connector to the Accupack (B) and connect the
standard USB connector to the PC, laptop or power adapter.
Using the USB port of a computer:
Using a power adapter:
16
All manuals and user guides at all-guides.com
USB ACCUPACK 7000 English
nOte: The charging time depends on the output of the
USB port used. USB ports on PCs or laptops often have low
charging currents available (~500 mA). It can take up to 15
hours to complete a full charging cycle in this case. More
powerful adapters can shorten the charging time accordingly.
2. OPeRAtInG tHe ACCUPACK
2 USB ports are provided for charging terminal devices.
Select Port 1 (OUT 1 5 V/2 A) (C) for devices with high output
requirements (F ) such as tablets or iPad
C
Select Port 2 (OUT 2 5 V/1 A) (D) for devices with lower
requirements (F ) such as mobile phones, smartphones,
D
MP3 players, etc.
nOte: If the maximum output of a port is exceeded, the port
will be disabled. Unplug the charging cable and re-enable it
by pressing the function key (A) once.
Select the appropriate adapter (from the included adapter kit) and
connect one of the standard USB ports (Port 1 (C) or Port 2 (D))
with the device to be charged
charging cable supplied with your terminal device.
USB ACCUPACK 7000
.
®
(F /F ). You can also use the USB
C D
17