Storage And Service; Specifications - Tripp-Lite AG-0306 Serie Manual Del Usuario

Storage and Service

Storage
To avoid battery drain, all connected equipment should be turned off and disconnected from
the UPS. Press and hold the power button next to the STATUS LEDs and disconnect the
unit from AC power. Your UPS will be completely turned off (deactivated), and will be ready
for storage. If you plan on storing your UPS for an extended period, fully recharge the UPS
batteries every three months. Plug the UPS into a live AC outlet and allow the batteries to
recharge for 4 to 6 hours. If you leave your UPS batteries discharged for a long period of time,
they will suffer a permanent loss of capacity.
Service
A variety of Extended Warranty and On-Site Service Programs are available from Tripp Lite. For
more information on service, visit tripplite.com/support.
Before returning your product for service, follow these steps:
1. Review the installation and operation procedures in this manual to ensure that the service
problem does not originate from a misreading of the instructions.
2. If the problem continues, do not contact or return the product to the dealer. Instead, visit
tripplite.com/support.
3. If the problem requires service, visit tripplite.com/support and click the Product Returns
link. From here you can request a Returned Material Authorization (RMA) number, which
is required for service. This simple on-line form will ask for your unit's model and serial
numbers, along with other general purchaser information. The RMA number, along with
shipping instructions, will be emailed to you. Any damages (direct, indirect, special or
consequential) to the product incurred during shipment to Tripp Lite or an authorized Tripp
Lite service center is not covered under warranty. Products shipped to Tripp Lite or an
authorized Tripp Lite service center must have transportation charges prepaid. Mark the
RMA number on the outside of the package. If the product is within its warranty period,
enclose a copy of your sales receipt. Return the product for service using an insured
carrier to the address given to you when you request the RMA.

Specifications

Model ECO350UPS
Nominal voltage and 120V~,
input range 95-145V
Nominal input fre- 50/60 Hz
quency and tolerance (+/- 5 Hz)
Nominal output 120V~ in line
voltage mode and
120V~ in
battery
Nominal output 50/60 Hz
frequency (+/- 0.5 Hz)
Output voltage regula- 120 V~
tion in line mode (+6% / -12%)
Output voltage regula- 120 V~
tion in battery mode (+/-10%)
20-08-195-9338D5.indb 18 20-08-195-9338D5.indb 18
ECO550UPS ECO650UPSM ECO750UPS
120V~, 120V~, 120V~,
95-145V 95-145V 95-145V
50/60 Hz 50/60 Hz 50/60 Hz
(+/- 5 Hz) (+/- 5 Hz) (+/- 5 Hz)
120V~ in line 120V~ in line 120V~ in line
mode and mode and mode and
120V~ in 120V~ in 120V~ in
battery battery battery
50/60 Hz 50/60 Hz 50/60 Hz
(+/- 0.5 Hz) (+/- 0.5 Hz) (+/- 0.5 Hz)
120 V~ 120 V~ 120 V~
(+6% / -12%) (+6% / -12%) (+6% / -12%)
120 V~ 120 V~ 120 V~
(+/-10%) (+/-10%) (+/-10%)
18
ECO850LCD ECO900LCDU2 ECO900UPSM
120V~, 120V~, 120V~,
95-145V 95-145V 95-145V
50/60 Hz 50/60 Hz 50/60 Hz
(+/- 5 Hz) (+/- 5 Hz) (+/- 5 Hz)
120V~ in line 120V~ in line 120V~ in line
mode and mode and mode and
120V~ in 120V~ in 120V~ in
battery battery battery
50/60 Hz 50/60 Hz 50/60 Hz
(+/- 0.5 Hz) (+/- 0.5 Hz) (+/- 0.5 Hz)
120 V~ 120 V~ 120 V~
(+6% / -12%) (+6% / -12%) (+6% / -12%)
120 V~ 120 V~ 120 V~
(+/-10%) (+/-10%) (+/-10%)
9/1/2020 1:28:45 PM 9/1/2020 1:28:45 PM