Domo DO8123 Manual De Instrucciones página 36

DO8123
ASSEMBLY
1. Turn the fan upside down and put it on a soft surface,
so that the control panel can not get damaged.
2. Click the 2 parts of the base together.
3. Lead the cord through the middle opening at the top
of the base.
4. Place the base on the bottom of the fan, so that the
screw holes in the bottom of the fan and in the base
are aligned. Make sure that the part of the base with
the cord guides is situated at the back of the fan.
5. Fasten the base on the fan using the 4 long screws.
6. Leid the cord through the cord guides in the base.
7. Turn the fan upside down again. The appliance is
now ready for use.
Remote control
Place a CR2025 battery into the battery compartment at
the back of the remote control.
USE
You can control the fan with the buttons on the control panel as well as with the
buttons on the remote control.
Place the fan on a flat, stable surface. Plug it in.
POWER: switch on the fan by pressing the POWER button. Switch off the fan by
pressing the POWER button for a second time.
SPEED: select the desired air speed by pressing the SPEED button. The selected
speed will be indicated on the LED display:
I: low speed
II: medium speed
III: high speed
MODE: there are 3 different modes, which you can select by pressing the MODE
button. The selected mode will be indicated on the LED display:
• NM - Normal: the fan will operate at a constant speed, namely the speed that you
have selected.
• NT - Natural: the fan simulates a natural, cool breeze. The different speeds are
alternated, interrupted by breaks in which the fan does not operate for a moment.
The maximum speed that occurs in the breeze can be selected by using the
SPEED button.
• SL - Sleep: the fan will decrease in speed every half hour and will eventually
All manuals and user guides at all-guides.com
36