Before Use; Use - Vitrifrigo SLIM150 Manual Del Usuario

11. Before Use

At the end of the installation, check the continuity of the earth circuit and perform all
electrical safety tests as provided by applicable regulations.
Protect and lock cables properly to prevent accidental cable tractions that may
disconnect it from the connections or that may come in contact with hot parts at
temperatures above 50°C or with sharp parts.
If the power cord is damaged, it must be replaced by the manufacturer or its service
technician or, in any case, by a person with similar qualifications, in order to prevent
any risk.
• Make sure that all packing materials have been removed
• Test all pipes to ensure there is no leakage
• Check all electrical connections.
•
Check whether the drawer can be removed from the appliance.
•
•Verify that the door can be closed properly.

12. Use

It's possible manage the fridge compartment as desired by moving storage shelves
and door shelves.
After a minimum of 4 hours of cooling the food can be put in the refrigerator.
To prevent excessive ice formation in the refrigerator, always cover liquid
products, let warm products cool down before placing them in the regrigerator.
Do not open the door or drawer any longer than necessary
To reduce the cooling time, store only pre-cooled food in the refrigerator. To
prevent the food form drying out or your refrigerator from smells, store food
separately in closed box.
The drawer is specially designed for bottles, cans and
vegetables.
To divide the drawer into compartments there is a bottle
retainer that can be placed at various distances.
The maximum storage capacity of the drawer is 20 Kg.
31
.
.
EN
N