Vivotek SD8363E Guía De Instalación Rápida página 4

3
Hardware Installation
3-1. Connecting RJ45 Ethernet Cable
RJ45 Cable Dimension (unit: mm)
Use CAT5e cables only.
Assembling Steps
Prepare an Ethernet cable
1
and strip part of the sheath.
Recommended cable gauge: O.D.
5.5~7
Insert the stripped Ethernet
4
cable through the sealing
nut and the housing.
(A)
Attach the gasket to the front
7
of the housing.
(E)
All manuals and user guides at all-guides.com
100
Insert the housing into the
2
screw nut.
(C)
Clamp the cable with
5
an RJ45 plug.
Connect the Ethernet cable to the RJ45 cable and secure the
8
connectors tightly.
EN-3
Components of the Waterproof
Connector
Sealing Nut (A)
Insert the seal into the housing.
3
(D)
(B)
Push the RJ45 plug into the
6
housing, then secure the
sealing nut tightly.
Seal (B)
Screw Nut (C)
Housing (D)
Gasket (E)