Using The Features - Greenlee 93-105/00408 Manual De Instrucciones

Using the Features

Basic Features
• Range: Press RANGE once to change to manual ranging; the
In the manual ranging mode, press RANGE to select the appropriate range for the measure-
ment you want to make. Press and hold RANGE for two seconds to return to the autoranging
mode. The
AUTO
• Store: Press STORE and the MEM icon will appear. The value on the display will be stored in
the memory. If the meter shuts off automatically, press PWR RST (Power Reset) to restore
power without clearing the memory.
The memory will be cleared when the meter is turned OFF.
• Recall: Use this function after using Store. Press RECALL to restore the value in memory.
The icon will appear and the MEM icon will appear and blink. The data stored in memory
will appear. The automatic POWER-OFF feature is disabled.
Press HOLD to exit the Recall mode.
• Hold: Press HOLD
display will be held constant until HOLD
6
All manuals and user guides at all-guides.com
AUTO
REL
-
DC
-
+
AC
icon will appear.
and the icon will appear. The beeper will emit a tone and the
MAX MIN
H
MEM
mVA
°CNµF
MkΩHz
AUTO
is pressed again.
icon will disappear.