Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
1. This 36" (914mm) Pro Tile Cutter has an adjustable
height scoring wheel with four positions. Selection
of the appropriate setting permits easier cutting of
up to 13/16" (21mm) thick tiles. Move the wheel up
to permit the breaker foot to snap the tile at any
position along the rail.
3. Before storage, lubricate the rail on the cutter with
a few drops of light oil to prevent rust.
REF #
32492
32493
32494
32495
EXTENSION ARM WITH BRACKET & FASTENERS - PTC36
WS2734revA
104 S. 8th Ave. Marshalltown, IA Phone 800-888-0127 / 641-753-0127 • Fax 800-477-6341 / 641-753-6341 www.MARSHALLTOWN.com
REPLACEMENT PARTS
DESCRIPTION
SCORING WHEEL WITH FASTENERS - PTC36
GUIDE FENCE WITH THUMBSCREW - PTC36
BREAKER FOOT WITH FASTENERS - PTC36
NOTES
2. Adjust the Hex Bolts & Nuts on the Sliding Block as
desired to modify sliding pressure. Ensure both the
left and right sides are adjusted equally.
4. Replace the scoring wheel when cutting becomes
difficult or the score line is not clean. This is a
standard wear part.
PART#
Quantity
PTC36SW
1
PTC36GF
1
PTC36BF
1
PTC36EA
2
7 of 8
Publicidad
Tabla de contenido
