Instructions - NuWave OXYPURE ZERO Manual Del Propietário

INSTRUCTIONS

Operating the Oxypure
The OxyPure's control panel allows you to turn the unit on and off, choose
an operating mode or function (see below), and monitor your filter health.
Air/Odor Quality - Detects particles as small as 2.5/1000mm
Clean
Particulate Matter (PM) with a diameter of 2.5 microns or less
0~5 5~10
1
See Troubleshooting Guide section.
POWER Button
1. Plug in the OxyPure. The unit will go into standby mode, with the red
LED around the POWER button illuminated.
2. Press POWER to activate the OxyPure. The LED will change to green.
3. After you press POWER for the first time, the OxyPure will default to
FAN SPEED 1 with no time limit. The airflow angle will be 90°.
Note: Subsequently, the unit will default to the last setting used.
Operating Modes and Functions
The OxyPure offers a number of different operating modes to handle nearly
any air cleaning need you have. These include Auto, Eco, Turbo, Ultimate
Clean and Sleep modes. If user has chosen any mode to run, the unit will
automatically run the same mode until it is changed. In addition, there are
also the Fan Speed, Timer, and Air Flow Angle functions.
®
10~20
Fan Speeds
2 3
20~30 30~50
4 5
nuwavenow.com nuwavenow.com
Dirty
Over 50
6
13