LiftMaster ELITE Serie Manual Del Usuario página 3

Illustration is for example only; your site may have
additional entrapment zones which MUST be protected.
Public Side
Place warning signs
on both sides of the
gate in clear view
Interior posts,
non-pinch rollers (2x)
Gap between vertical
bars MUST be less
than 2-1/4" (57 mm)
Edge sensor
Left hand
gate opening
Photoelectric sensor (open direction)
Earth ground
Photoelectric sensor (open direction)
Pedestrian gate located near the slide gate.
Make sure a separate pedestrian entrance is
available and the path is clearly designated.
6' (1.8 m)
minimum
Edge sensor
Photoelectric sensor
(close direction)
Edge sensor
Photoelectric sensor
(close direction)
Any gap larger than 2-1/4" (57 mm) between
gate and fixed objects MUST be protected.
Install edge sensors where gap between post
and gate creates a draw in zone.
Take a photograph of the complete installation site for your records
Secure Side