Fimei MK-37/C Instrucciones De Operación página 10

7. Upon removing the egg whisk, just operate the plastic connector. Do
not hold the steel wire abruptly. Otherwise, the whisk may be damaged.
8. Prior to turning on the power, please make sure that the gear knob is located
at the "0" gear. After turning on, the gear can be adjusted.
9. At the connection part of the up and down body, a "Safety Switch" has been
designed. Three states need to be watched during operation:
A. When the machine head is raised, do not turn on the power or operate
the machine. After closing the up and down part of the machine head,
turn on the power and toggle the gear, then the machine will operate
accordingly.
B. Press the raising button during operation, the machine head will raise
and the operation will instantly stop.
C. Turn on the power, the machine head will raise. Please do not close the
machine head when the gear button is at any location from 1 to 6.
Otherwise, the machine will abruptly and quickly operate for a while,
which will against the safety and damage may be caused herein.
Please be careful.
10. The power feedback device is imbedded in this machine. The output
power and rotation speed can be automatically adjusted according to the
loading situation. Short delay may occur in booting and gear switching.
Operation will not be in constant rate under different conditions. Be easy
when using it.
11.Notices to ventilation and heat dissipation. Keep the machine away from
the heat sources (e.g. gas burner, icebox, electric bowl, etc.). The mesh
heat dissipation outlet is located at the bottom and rear part of the machine.
The placement table should be smooth and flat. Do not make the air
outlet be obstructed (e.g. obstructed by wall) since it will block heat
dissipation.
12.The bowl can stir continuously for 10 min and then stop it for 3-5 min.
Continuous operation time should reduce in summer to ensure that the
machine head will not scald hands. Otherwise, please instantly stop the
machine and cool it down.
13.To extend service life of this machine, please pay special attention to
the continuous operation time of this machine.
English