Figure 2
Figure 3
Figure 4
1.
Insert key into keyhole on top of dispenser.
2. Press down and hold pressure on key while lifting up
dispenser to disengage from mounting plate.
PAGE 2 OF 6
LOADING TOWEL ROLL
REMOVING DISPENSER FROM WALL
1-800-295-5510
uline.com
1.
Remove perforated cardboard core from center of
the roll. (See Figure 2)
2. Pull toweling from the center of the roll and twist the
end of the toweling enough to slide into dispensing
cone. (See Figure 3)
3. Feed toweling through the dispensing opening at
the bottom of the dispenser. Close dispenser.
(See Figure 4)
NOTE: Keep dispenser pressed tightly against
wall while lifting.
0621 IH-2534