How To Assemble - Daewoo RC-380BM Manual De Usuario

PRECAUTIONS
■ Before using, please make sure the network voltage coincides with the product rated voltage.
■ Keep the appliance away from stove or any other high temperature objects so as not to
influence its operation by deforming its plastic parts.
■ Do not bend, extrude or pull by the flexible hose, Stop using the broken or damaged
hose, instead to use the new hose.
■ When you need to clean your appliance or stop operation, unplug from the power outlet.
When unplugging, be sure to hold the plug, but not pull or carry by the power cord.
■ Never use the appliance without dust bag or when the dust bag is broken or not
assembled .
■ When sucking, do not suck up particles as mud, paste ,wall ashes, or sharp articles.
otherwise it may result in obstruction to the dust bag or air filter or damage to the motor.
If sucking up these particles, please immediately clean the dust bag and air flow filter.
■ When in use, do not suck up suck hair rolls, large paper rolls or plastic bags which may
easily lead to block the suction hole or suction tube or hose. Other wise it may cause
breakdown or deforming of body cover. If any block occur to the suction ,immediately
stop operation by unplugging from the outlet for cleaning.
■ When cleaning the appliance, wet cloth soaked with water or neutral detergent shall be
used instead of gasoline or banana water. Otherwise it may lead to breakage of
fadedness of the body cover.
When in use, do not block or shelter the rear outlet cover to avoid influencing normal air
■
exhaustion. Otherwise, the motor will be damaged by overheat.
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a
■
similarly qualified person in order to avoid a hazard.
All manuals and user guides at all-guides.com
4

HOW TO ASSEMBLE

■ Push the button of hose head, ■ If want to pull out the hose from
and insert it into unit inlet until unit, please press the button on
locked the hose before pull out.
■ Connection of the tubes. Refer ■ Connection of connecting tube
to the above said. with floor brush. For connection,
insert the smaller end of
connecting tube into the tube on
the floor brush, and then swivel
it to firm connection.
■ How to use connecting tubes
and curved wand?
When connecting, insert the
bigger end of the connecting
tube into air flow handle and
then swivel it to firm connection.
■ Regarding the connection of
connecting tubes with crevice
nozzle, refer to the above said.
5