Impecca IWA-08KSFP Manual Del Usuario página 14

To Select the Operating Mode:
PMTS
To operate on Fan Only: Use this function only when cooling is not desired, such as for room air circulation or to exhaust
stale air (on some models). Remember to open the vent during this function, but keep it closed during cooling for
maximum cooling efficiency. You can choose any fan speed you prefer.
During this function, the display will show the actual room temperature, not the set temperature as in the
cooling mode. In Fan Only mode, the temperature is not adjusted.
To operate on Dry mode: In this mode, the air conditioner will generally operate in the form of a dehumidifier. Since the
conditioned space is a closed or sealed area, some degree of cooling will continue.
To Use the Energy Saver Feature:
PMTS
To choose operating mode, press the Mode button. Each time you press the
button, a mode is selected in a sequence that goes from AUTO, COOL, DRY, and
FAN. The indicator light beside will be illuminated and will remain on once the
mode is selected.
Press the Mode Button
To operate on Auto Feature: When you set the air conditioner in AUTO mode, it
will automatically select cooling, heating (some models), or fan only operation,
depending on the current room temperature and the target temperature you
have set. The air conditioner will control room temperature automatically. In
this mode, the fan speed cannot be adjusted.
Energy Saver Feature: This function is available on COOL mode. The fan will
continue to run for 3 minutes after the compressor shuts off. The fan then cycles
on for 2 minutes at 10-minute intervals until the room temperature is above the
set temperature, at which time the compressor turns back on and Cooling Starts.
Press the Energy Saver Button
- 13 -