Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
OBJ_BUCH-167-002.book Page 15 Wednesday, October 18, 2006 1
Assembly
Inserting/Replacing the
Battery (see figure B)
Use only alkali-manganese or recharge-
able batteries.
To open the battery lid 7, slide the lid in
the direction of the arrow tip and fold it
up. Insert the batteries. Pay attention
that the polarity is correct, according to
the representation on the inside of the
battery lid.
After inserting the batteries and clos-
ing the battery lid 7, the measuring tool
is automatically switched on. For the
checking of the display, all indicator
elements appear for approx. 20 sec-
onds. Afterwards, the current angle is
displayed.
When the battery indicator b appears
in the display for the first time, meas-
urements are still possible for approx.
1 – 2 hours.
When the battery indicator b blinks,
the batteries must be replaced. Meas-
urements are no longer possible.
Always replace all batteries at the
same time. Only use batteries from one
brand and with the identical capacity.
Remove the batteries from the
measuring tool when not using
it for extended periods. When
storing for extended periods, the
batteries can corrode and dis-
charge themselves.
Attaching the Leg
Extension (see figure A)
Slide the leg extension 4 (accessory)
onto the fold-out leg 1 from the front
(shown in figure A on the fold-out page),
observing the arrow on the extension.
Extend the leg extension as far as nec-
essary, but not beyond the stop (maxi-
mum position shown in figure A).
1 609 929 J96 • 18.10.06
English | 15
Publicidad
Tabla de contenido
