Standard Accessories - Metabo HPT EC 36DA Manual De Instrucciones Y Instrucciones De Seguridad

English
3. AC/DC adapter
Problem
The adapter's error lamp
is blinking red and the tool
does not operate when
switched on.
The adapter's error lamp
rapidly blinks red and the
motor does not operate
when the tool is switched
on.
During protective operation,
the LED will blink diff erently
for AC/DC adapter use and
battery use.
WARNING
ALWAYS use Only authorized metabo HPT replacement parts and accessories. Never use replacement
parts or accessories which are not intended for use with this tool. Contact metabo HPT if you are not sure
whether it is safe to use a particular replacement part or accessory with your tool.
The use of any other attachment or accessory can be dangerous and could cause injury or mechanical
damage.
NOTE
Accessories are subject to change without any obligation on the part of the metabo HPT.

STANDARD ACCESSORIES

EC36DA
(WC)
EC36DA
(NN)
OPTIONAL ACCESSORIES.....sold separately
1. Battery (BSL36B18)
2. Battery charger (UC18YSL3)
3. Battery cover (Code No. 329897)
4. AC/DC adapter (ET36A)
26
Possible Cause
Output is suspended because the tool or
the AC/DC adapter is overheated.
Output is suspended because the tool is
overloaded.
ACCESSORIES
Intake fi lter (Code No. 377736) ......................................................................1
Battery (BSL36B18) .......................................................................................1
Battery Charger (UC18YSL3) .........................................................................1
Battery cover (Code No. 329897) ..................................................................1
Intake fi lter (Code No. 377736) ......................................................................1
Possible Solution
Allow the tool and AC/DC adapter to
suffi ciently cool down.
Remove the cause of the overload.
This is not a malfunction.