Function Buttons And Status Indicators; Remote Control; 7�1 Activating The Remote Control - Wentronic Goobay 59509 Instrucciones De Uso

6

Function buttons and status indicators

The fan has 5 function buttons and 12 status indicators.
In the following table, the function buttons and the status indicators are explained.
7

Remote control

7.1 Activating the remote control
• Pull the contact protector out of the battery compartment (20).
The remote control is now activated.
Function buttons
Designation Description
Press the button to switch on the fan. Press the button again to select the pow-
ON/SPEED
er level.
Press the button to switch the oscillation function on or off. When the oscillation
SWING
function is switched on, the fan moves from side to side.
Press the button to set the desired mode. You can choose between the modes
MODE
NORMAL, NATURAL and SLEEP.
Press the button to activate the timer function. Press the button again to extend
the duration of the timer function.
You can set the timer function at half-hour intervals (0.5h, 1h, 1.5h, 2h, 2.5h, 3h,
3.5h, 4h, 4.5h, 5h, 5.5h, 6h, 6.5h, 7h, 7.5h).
TIMER
After the set time has elapsed, the fan switches itself off. To end the timer func-
tion, press the button until all status displays for the timer (4H, 2H, 1H, 0.5H)
have gone out. Alternatively, you can switch the fan off and on again to clear
the set timer.
Press the button to switch off the fan. The set power level and mode remain sa-
OFF
ved and are active when you switch the fan on again.
Status indicators
POW When the status indicator lights up, the fan is connected to the mains.
When the status indicator lights up, the SLEEP mode is active. The fan runs a
SLE
programme of different fan speeds.
When the status indicator lights up, the NATURAL mode is active. The fan is
NAT
running a programme of different fan speeds.
When the status indicator lights up, the NORMAL mode is active. The fan is ge-
NOR
nerating a steady flow of air at the set power level.
SW When the status indicator lights up, the oscillation function is activated.
When the status indicator lights up, the power level H is set. The fan generates
H
strong airflow.
When the status indicator lights up, the power level M is set. The fan generates
M
medium-strong airflow.
When the status indicator lights up, the power level L is set. The fan generates
L
light airflow.
If one of the status indicators lights up, the timer function is active for the spe-
4H, 2H,
cified time. If several of the status indicators light up, timer function covers the
1H, 0.5H
sum of the active time intervals.
EN
14