Descargar Imprimir esta página

Next Level Racing Elite Serie Manual De Instrucciones página 6

Ocultar thumbs Ver también para Elite Serie:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 17
support@nextlevelracing.com
FRONT/SIDE MOUNT SETUP
06
Install 4 x T-Nuts into the inside channels of the Right Vertical Post and slide them down using the
provided Allen key.
)
)
A
B
(
)
MITERED EDGE
(
)
MITERED EDGE
07
A) Install 4 x T-Nuts into the outside channels of the Left Outrigger Arm.
B) Install 4 x T-Nuts into the outside channels of the Right Outrigger Arm.
INSIDE
08
Install 2 x T-Nuts into the top channel of both the inside and outside of the Left Outrigger Arm. Repeat
for the Right Outrigger Arm.
PARTS:
• • 4 x T-NUTS
PARTS:
OUTSIDE
• • 8 x T-NUTS
(
MITERED EDGE
)
PARTS:
• • 8 x T-NUTS
Repeat
on Other
Side
10
(
)
MITERED EDGE
)
A
09
A) Align the holes on the Mounting Plates with the T-Nuts previously installed in STEP 07
B) Bolt through and secure with 2 x M8 Countersunk Bolts and 2 x M8 Bolts. Repeat on the other side.
)
A
10
A) Align the Outrigger Arm assembly with the T-Nuts previously installed in STEP 02 or STEP 06.
B) Bolt through and secure with 4 x M8 Bolts and Washers. Repeat on the other side.
)
A
11
A) Align the holes on the Upright Mounting Brackets with the T-Nuts previously installed in STEP 08.
B) Bolt through and secure with 4 x M8 Bolts and Washers. Repeat on the other side.
Video Instruction: bit.ly/nlrbuild
PARTS:
Repeat
• • 2 x MOUNTING PLATES
on Other
)
Side
B
• • 4 x M8 16mm BOLTS
• • 4 x M8 WASHERS
• • 4 x M8 COUNTERSUNK BOLTS
(
Location For Countersunk Bolts
)
PARTS:
)
B
• • 8 x M8 16mm BOLTS
• • 8 x M8 WASHERS
Repeat
on Other
Side
PARTS:
)
B
• • 4 x UPRIGHT MOUNTING
BRACKETS
• • 8 x M8 16mm BOLTS
Repeat
on Other
Side
• • 8 x M8 WASHERS
11

Publicidad

loading

Este manual también es adecuado para:

Elite f-gt