Operating Instructions - Kobalt KLB 1040B-03 Manual Del Usuario

OPERATING INSTRUCTIONS

3. To Start/Stop the Blower
The variable-speed trigger switch (A) turns the
blower ON/OFF and controls the speed.
The blower is also equipped with a trigger-lock
lever (C) to turn the blower ON/OFF and lock the
blower at a certain speed.
a. To turn the blower ON, depress the variable-
speed trigger switch (A).
b. To turn it OFF, release the variable-speed
trigger switch.
c. The variable-speed trigger switch delivers
higher speed with increased trigger pressure
and lower speed with decreased trigger
pressure.
To Turn the Blower ON
a. To turn the blower ON, depress the variable speed trigger switch (A).
b. The variable-speed trigger switch delivers higher speed with increased trigger pressure
and lower speed with decreased trigger pressure.
c. To keep the blower running at a certain speed, move the trigger-lock lever (C) toward the
back of the tool.
d. The trigger-lock lever can also be pulled back to start the blower without needing to first
depress the variable-speed trigger switch. The blower runs at higher speeds as the lever is
moved further back.
To Turn the Blower OFF
a. If the trigger-lock lever (C) is not engaged, release the variable-speed trigger switch (A).
b. If the trigger-lock lever is engaged, move the trigger-lock lever forward to the unlocked
position.
Turbo mode
Press the turbo button (B) while working to temporarily increase the air speed to the maximum
level. The blower will resume the previous speed when the boost button is released.
4. Hanging hole
The blower is equipped with a hanging hole (D).
The blower can be hung from a screw or nail
for storage. Make sure that the screw is strong
enough to support the weight of the blower and the
battery.
3
C
4
10
B A
D