Troubleshooting - Mainstays MS61100016711 Manual

Tabla de contenido

Idiomas disponibles

CLEANING BETWEEN BLENDING OPERATIONS

In case the appliance needs to be cleaned before being used again to blend different food,

follow below procedure:

• Ensure the Jar is assembled for normal use.

• Fill the Jar halfway with lukewarm and clear water. Do not use any detergent.

• Place the Lid, together with the Measuring Cup in, on the Jar.

• Press and hold the PULSE button. Release the PULSE button after a few seconds.

• Disconnect the plug from the wall outlet.

• Remove the Jar from the Motor Unit and discard the water used.

• Dry all parts and surfaces thoroughly before operating the appliance again.

NOTE:

- If the quick cleaning procedure did not remove all food residues, follow the general

cleaning procedure.

STORAGE

• Before storage, always make sure the appliance is completely cool, clean and dry.

• It is recommended to store the appliance in a dry place.

• Store the appliance on a stable shelf or in a cupboard. To avoid accidents, ensure that

both the appliance and its power cord are beyond reach of children or pets.

Problem

The appliance is not

working

The blades are

rotating very slowly

Blender_MS-6SPBLD_US_V4_200507.indd 8

TROUBLESHOOTING

Cause

Appliance not plugged in

Wall outlet not energized

Overheated appliance

Too much food in the Jar

Malfunctioning appliance

Too much food in the Jar /

Motor is overloaded

Not enough liquid in the Jar

/ Motor is overloaded

Insert the plug into the wall outlet

Check fuses and circuit breaker