Switching The Heater On And Off Via Wifi; Cleaning And Maintenance - Blumfeldt Heatbell Smart Wall Manual

EN
18

SWITCHING THE HEATER ON AND OFF VIA WIFI

• Make sure that the WLAN is available at the installation site of the device.
• Insert the power plug into the power outlet.
• Press and hold the POWER SETTING button until the LED light flashes
quickly.
• Open the WiFi app on your smartphone to connect the heater. Once the
heater is connected, you will hear a tone and the LED will stay on.
• The heater can now be controlled from your smartphone.

CLEANING AND MAINTENANCE

• Unplug the power cord from the wall outlet and allow the unit to cool
completely.
• Keep the device clean. The outer surfaces can be cleaned with a soft and
damp cloth. If necessary, a mild detergent can be used. After cleaning, dry
the device completely with a dry, soft cloth.
• Do not use alcohol, benzine, scouring powder, furniture polish or steel
brushes to clean the device. Otherwise, the surface of the device may be
damaged.
• Never immerse the unit under water and make sure that it does not get
wet.
• Wait until the heater is completely dry before using it.
• Any repair or maintenance work involving the replacement of a heating
tube should only be carried out by the customer service department or an
electrician qualified for this purpose.
• When not in use for an extended period of time, cover the heater to
protect it from rain and dust.