ITS EK HDT2 Manual página 37

EN
Note : Default Password is 000000. There is also a Master PIN, in case of forgetting the
password that you were set. The mater PIN is 873543.
Factory Reset: If you choose to restore Factory Settings, the Channel Lists and all
Settings will be deleted.Entering password is "000000".
System information: Displays Information about the Lib, application,hardware ver-
sion,Hardware info and Build time.
Software Upgrade:
Upgrade Type: USB Upgrade
Section: All
File Path: Choose correct software bin file
Start: Press OK to start upgrading process.
Network Setting:Set network configuration.
Power on Control: Power On/Standby/Last state
Power on: Receiver will keep power on after power off and power on.
Standby: Receiver will keep standby after power off and power on.
Last state: Receiver will restore last state after power off and power on.